Stuff on the left is everything that I have run through my cock in the last 7 months. Thought it would be cool to lay it all out with the future jewelry as the stretching and new piercing journey continues. So I can periodically take an update shot to visualize progress.
who else has accumulated an impressive quiver of metal? (this Is about half of what I got 🤣)
What better way to celebrate the 4th of July than to upgrade to 2 gauge? Bar in for now 1” 2g ring waiting to replace it in a few weeks. now I need to buy a 1g set. terrible problems to have 🤣.
exploring the vein structure for a future project.
The Lacuna Magna was naked for a while cause its neighbor is the 13mm ball end of a 2g 1-1/2” PA that goes all the at to my shaft base. I got in a whole bag of captive section gold titanium rings so figured what the heck feed one in and see what a ring looks like. Took a better shot of the 2 day old two gage pierced lorum, zero discomfort and super happy with how even the placement came out
First time piercing with a 4g needle. tapered to 2g. thrilling to push my largest gauged used from 8g to 4!
New box of goodies arrived today, including a set of 1-1/2” long curved bars to keep stretching the deep urethra piercings. Figured I would give the lower one a try which wasn’t quite ready for 2g a few weeks back. Easy insertion this time. hopefully tomorrow I can change the short gold 6g to a long curved 6g. Currently giving the urethra some time to get used to the bigger diameter before trying to have a 2 and a 6 side by side at once.
Did a little morning stretching. Tried 2g in the other looser Deep urethra but it wasn’t quite ready. hopefully after this stretch I can maneuver a seamless ring between the two for an orbital. current setup is 4g next to 6g.
About a month ago I though about the feasibility of an anti dolphin piercing where the bar sticks out of your skin and the balls are inside you. I have yet to even run in a standard dolphin as my upper hole was only recently stretched to 8g. Figured go big or go home.
Yesterday morning I made the attempt with a 1-1/2” bar And gave up. After a solid 45 minutes of messing around the original jewelry went back in. To pull it off you have to feed the bar into the lower hole like going for a normal dolphin and then feed it all the way out after attaching one ball and stuff it down you urethra. Then rotate it axially 180 degrees from how it wants to sit so it can be fed through the upper hole. At that point you have about 1/4” of a very long bar sticking out of you, and the rest is down under your balls, if you slip and the whole thing goes in… well you have a big problem…handling with hemostats to get a grip I just couldn’t get the alignment right to feed the bar into the upper fistula.
Not one to give up and wanting to see my idea realized, this morning i gave it a second go. I switcher to a longer 2” bar and started again. With the bar almost completely in I used a finger to find the end in my perenium and pinched the urethra closed and applied upward pressure. I had a taper in the upper piercing, did some cock yoga to bent and sort of align the bar end and the arrow taper base together, keeping inward pressure on the top of the taper So though the taper and bar were in contact they were not aligned and under pressure. When I released the tension I had on the taper while pushing down on my cock head to force the taper and bar into alignment the bar slid right up and through the upper fistula.
This was just a test run of the procedure, and also a fit and comfort check. I left it in for a few minutes soft no issues, and Also got erect to see how that was. Hard this particular bar puts a lot of pressure on the inside of my glans and likewise deep in the shaft, it felt good but not ideal as this bar is smaller gauge than I intend for the final and also probably a bit too much curve to it. i plan on running a 6 or 4 gauge in this setup.
I got a love for fancy anodized bars and this way both a ball and a chunk of the bar are visible, and the way it sits with the ball stimulating the glans while erect its extremely functional.
So last Friday what I feared happening did happen, worked through it relatively easily though and figured I would share an oops moment, they happen after all and maybe this helps someone in the future. just about all male genital piercings have the jewelry ends external, the few that don’t have them superficially inside (bars in an RPA where the ball is intentionally in the navicular fossa in the glans) are about all I have ever seen. with the deep trans urethrals I keep the balls in three spots poking out/near the glans, base of the shaft while cleaning or turned down and sitting in the perenium. This comes with a bit of a risk and my biggest worry with all piercings I have has always been having a ball come off deep in my urethra. nightmare scenario would be while flipped downwards and thus deep, there being more of a potential of it going up into the bladder or perforating the urethra. Thankfully when it came time for things to disassemble it was merely at the base of my shaft and not as deep as possible. While doing a soak thst morning I had the bars pulled all the way out so just the one ball is inside and the bars can get cleaned. That’s when I heard jewelry fall into the bowl I use to soak. I figured it was the deeper loser one as it has self stretched nicely, I looked down and was not happy to see it was the newer stretched one. that would not fall out with the ball on 😳. Sure enough if fished out the jewelry and no ball attached. The lower trans urethral was still in and that would keep the ball from going down further in the urethra so now it was a matter of how to express it out. I fished out my taper set, lube and a band and got to work. I threw a band on right above my balls and then removed The deeper trans urethral. lubing up a 10g taper I probed in the bottom hole and quickly found the rogue ball end. pushing the ball up with the narrow end wasn’t really effective, but reversing the arrow taper worked like a charm and I was able to in a couple minute drive the ball up and out. I took my time as this is an internally threaded ball and I was being quite careful to keep the threading in the cup of the taper. the bar I had been using was a bit shorter and that meant tighting the beads periodically was more challenging, though I did it religiously I still got a good spook. Back to longer bars so I can really get a torque on the beads and not have a repeat. Also am contemplating maybe altering the setup, investigating food safe Loctite, or integrated balls on one end on custom bars. the Latter would cut the risk completely. anyways dick pics of the long bars back in place and in pop out mode.
This never happened when I just used barbells. Unintended side effects of switching to CBRs, both rings filmed over. inter-dimensional portals to a good time… or well I guess from a good time 😂. Who else gets the same way?
Saw SBFH’s pre version, and one other from a while back, who else has a similar shot?
So the 1.5” cbb I put in a few days ago is 6g with a 5mm end went small on the ball to keep it from pressing on that 7mm ball you see next to it in the first shot. figured at some point the bar might slip down my urethra and stretch the fistula and one day I would find it had escaped. was suprised it made it attempt at freedom so quickly as it did just that today, popped right out the piercing and slid out my pants leg. So safe to say my lower transurethral is an easy 4g now, kind of annoyed that one stretches like nobodys business and I’m trying to get the other one caught up. I just got them both to 6 and now I’m at 4 and 6. since an 8g CBR came in the mail today I intentionally stretched up my meato PA after this evening salt soak. Got the rest of a set of CBRs for stretching that piercing on order today to get up to 0g, along with two short wands that if this lower trans keeps at it I plan to shove one in backwards and wand through the base of my urethra.
Finally got long jewelry back in the trans-urethra holes. Both are now up to 6g and the bars go past each other internally, so there is metal the whole way down the urethra again 24/7. Had to throw short bars in to give myself space to work adding the shaft cross and then make sure nothing was pressuring those bars on initial healing. I’m on week three now and some new curved long bars came in the mail over the weekend. not noticing any stim or comfort differences with the curved bars vs straight bars which I have used up to this point. The short bars were actually fun for stimulation, they stuck straight out and when pushed around were quite stimulating, and super comfortable but aren't conducive to penetration. just need to shorten the shaft ampallang bar and I’ll be back in business. now to see how the extra bar and ball sticking out effects the urine stream, I was doing so well with the last setup. messing around with stuff every few weeks for the last several months has made peeing an adventure 😂.
Who else categorically ranks the first few times climaxing after they were pierced as some of if not the best feeling/strongest of their life?
Long multi part question so if you answer thanks in advance. Was it you attribute it to raw nerves tenderness/pain as amplifying the pleasure if you did it before the recommended “leave it be“ guidance? how soon after piercing?
What factors do you think made it so good?Do you attribute it to direct improved nerve stimulation? or that the piercing made you move differently and that made the feeling different (change up of style so to say)?, or perhaps you just had a different outlook on things and it was all a head thing? Some combo of a factor of two or three of those things? or maybe I missed something and you have a forth to add?
Second related part of this post. I never seem to make it very far into the should be left alone period of aftercare. And I am wondering if that bit of advice for aftercare is actually the best answer to give folks, especially ones with their first piercing. All I got is my own experiences which is why I am looking for other perspectives/experiences as comments.
My current situation with healing as a case in point. With the new shaft cross I am in the period of getting woken up by painful nighttime erections, nothing new, was that way 20 years ago with the half adapdravya, and more recently with the deep urethra piercings. Most folks with any sort of glans piercing can relate I am guessing, if not I am envious.
The cross has been extra interesting the last few evenings (seems like as soon as i doze off it triggers an erection that hurts and wakes me and the cycle repeats. Leads to major sleep loss, couple that to a lot of expansion and. contraction and pressing on clothing and i would venture to say it’s got potential to be detrimental to healing.
So now the controversial thought from personal experience: a quick JO session to take care of business right before going to bed during the “you shouldn’t touch it phase” cuts out the majority of the night time pain-boners, and results in getting a good night sleep after a One and done erection that is less detrimental than maybe a dozen or more unconscious night ones that comes with sleep loss. Thoughts?
Couple the potential healing benefit with the amazing releases and I question the conventional guidance.
if you made it down here kudos. My answers to my own questions are I don’t make it more than two days before trying the piercing out. pain amplifying pleasure is definitly involved for most. Since the last 6 adds have been deep shaft, I have definitly had to alter technique to reach release, it’s been a fun process relearning how to get off. I’ve been pierced a bunch so think the mental only factor is completely gone, it’s just a routine thing for me now (my answer after my first piercing 20 years ago would be completely different and been mostly about that third factor of “I’m a different person” with a healthy dose of the physical feeling was different and a minor amount of I had to change methods and that felt new and interesting. so at the start it was a combo of the there factors and that has shifted for me between piercings. Recent Example 1: the hafada I added is a no direct stim, no indirect stim and I had no noticeable change on mental state, the feeling after that one was it was unmemorable. Example 2 the The Lorum almost the same piercing as the hafada but that eas a straight bar and the lorum is a CBR, just different jewelry made for minor direct stim improver feeling it swing, no indirect change maker, no pain added, mentally different feel to it driven by the swing so still ranks high (but not at the top). Last thoughts The cross and deeps take up a lot of space and Radically change handling (especially with how fresh the cross is, that has caused me to focus more on how things feel and enjoying the nuances of less forceful motion or vigorous pace (Not the same oh wow I’m pierced mental excitement but a change in mentality just the same).
so what are y'all's experience?
The hidden pocket in your urethra you didn’t know about... So ever since part-subbing my manhood I’ve noticed the odd V channel tucked in where the glans used to hit the shaft. While getting way deep into anatomy in prep for my shaft cross I found this image which highlighted exactly what I had been looking at all these years. pulled up the definition of Lucian Magna and found out it’s not just a V but the top is actually a valve (Guerin‘s valve) and it is the entrance to a dead end congenital tunnel in the top of the urethra found apparently in 30-50% of males if you trust the internet. The tunnel is called Guerin‘s sinus after the French Surgeon who described it in the 19th century. I was planning on off centering the shaft amp I did a bit as when I put my long trans urethral bars back in they need the space Right up the middle. Extra glad i did cause I would have plowed right through where this structure is. Some males have little more than a dimple, others can have a deep bifurcated channel. Getting curious I cleaned a taper and probed mine a few days ago. It went in about a 5/16“ maybe 1/2” I would say. I decided though it may be short lived based on the thinness of the sinus and being in a high abuse spot, it needed piercing. In doing some more poking around the internet between then and now I saw u/CollierChris did the same a year ago, so maybe this is number two ever 🤷🏼♂️. There wasn’t really any info on the anatomy with the previous post and I thought it the fascinating part so wanted to share. Today I snagged a few different options of 16g short barbells with 2mm balls, a curved, straight and almost staple shaped. 16g puts zero pressure on the natural part of the tunnel so giving it the best shot at lasting. Ended up using the straight bar. Getting the ball on was a challenge being how small it was and the fact that the forward end of the bar is still right at my meatus. Can barely see the deeper ball in the shot, I got it as long as I could but any deeper and I wouldn’t have been able to get the bar inserted. I got a thing for obscure piercing and I don’t think it’s gets more obscure than this.
Figured at the one week mark it was time to poke my head in the sub and join the party. At the sore at night when things pop up phase but so far easy healing. That got me thinking, do the barbell length downsize sooner or wait it out to the 6 week mark? what did yall do on either deep or standard crosses, also how aggressive did you go on stretching up?
also are most people rocking m&m or other low profile ends or regular balls when it comes to fun with (in) friends?
Shots had only a little to do with the question , but who doesn’t love a pic 😆. So the CBR once in a while rotates all the way to the side of my shaft and works its way behind the shaft ampallang ball. That got my mind back to thinking about an old thing I contemplated. Particularly on the scrotum where things are loose and tolerant to stretch and pull. has anyone done bars adjacent to CBRs so maybe not all the time but for fun temporarily the ends of the bars (oversized if need be) can be fed through the rings like a set of buttons?
So in my quest to add a shaft magic cross I had to clear up space in my sub for where the deep half-apadravya will exit. I had a 6g titanium bar in the deepest dolphin hole, and It was about time to stretch the second one from the initial 14g as it was getting to the point it was loosening a bit but that also meant the thing gauge was getting tender. Talk about a downsize went from a 38mm and 35mm set of bars to half inch long bars with 6mm balls. had to attach them to tapers and feed them into the fistulas from the inside. made sure to crank those inner balls down real well since I am guessing I won’t be seeing them for a good long time. took the opportunity since I was switching bars to stretch the second deep urethral, went from 14 to 8, definitly was a different experience than with the first one where 8g and even 6g just slid right in. No care fee easy stretch on this one but got it done and the sting/pinch died back after a few hours and now half a day later it’s way more comfortable than the original bar. These are still a touch too long for the fistulas so will eventually downsize. good news is the spot I need access to for the shaft apa is now wide open, so I am not long from doing the piercing and finally having my cross. Hope at some point to get the long big gauge bar back in as I enjoyed the aesthetic and feel.