u/dominushunt

Hey guys,

I would like to give a quick intro and review on the Handy 2 and ask for suggestions on controllers.

Intro and Review
I had an h1 and moved away from the handy device after a rough start with h1's. I received 2 different units DOA. Forgive and forget, despite all the nonsense I hear about the h2 problems I am a sucker and I was curious so I grabbed an h2 pro this week. First test last night was good, hope it lasts.

A little background, I have h1, now h2 pro, arcwave ion, vacuglide 2 and an OSR2+. I also have tons of sleeves, fleshlights, clamps, magic arms, mounts etc etc so I would consider myself a seasoned user of all of the above.

Overall I would say the h2 pro is pretty good so far. Liked the battery option as I think my biggest gripe with all this crap is the setup time. I found even as a new user once I got everything setup and online I was getting to the action in no time. The combination of the quick attach sleeve and battery made it a breeze.

Here are some pictures of my hands free set up. I have a lot of options but this is the setup I mostly used for my h1 and my OSR. I like to sit in the bed but also have the option to lay down.

I am using a super clamp and a large teethed magic arm that connect together using the 5/8th inch baby pin connectors. I swapped to these after sheering off a few 1/4 inch camera screws on different mounts. Indestructible. They also work much better for heavier and rowdier devices like the OSR2+. My goal was to have most of my hardware work with either device. The superclamp attaches to an old plywood structure that I believe came from a toddler play setup. I have used this as a counter weight for all of my setups for some time. I weight the board down with my weighted blanket and it works wonderfully.

I use an off-brand quickshot modified with an acrylic tube to give myself a larger better mounting surface. I have liked this setup as it works well with both my handys and my OSR and gives me a few other advantages I can go into if anyone is curious.

I attach this modified quickshot to the handy with 2 reusable zip ties. I find these work way better than any velcro strap and creats a tighter connection with the machine, less give, more feel for the user.

Every single product I am using here is available on amazon, happy to share links.

The Question

I am looking for handy controllers that allow the user to select more advanced patterns and sensations. Think the Handyverse random stoker but even more features.

My favorite sensations are strokes that pause halfway up or down and then continue. Strokes that go up faster than they go down. Strokes that start slow and slowly speed up as they go up and down. Things like that. I find I feel more pleasure with erratic and unpredictable motion, with all of the controllers I have found, what comes up goes down basically the same way.

I am not a fan of scripted content because most of it is too fast and to be honest I use video content etc. to get in the mood but once I start using my device I am focused on sensation over visuals.

I am also interested in controllers that work well and are reliable, I have found some controllers that look promising but they are old, beta versions, misbehave or crash often. Looking for something stable.

Hey crew one of my intentions when I got into automated sex toys was to eventually build a milking table and a way to mount all of my devices below it. I love the feeling of full relaxation and laying on my stomach and having tireless stimulation.

I have spent the last 6 months or so assembling and getting used to the different devices. I currently own 2x Handy v1; 1x OSR 2+; 1x Vacuglide 2 and countless sleeves, clamps, magic arms, etc etc

When Brian and the crew announced the Cock Dock I immediately knew this was the solution to getting the Vacuglide mounted on a milking table.

My milking table is pretty basic right now. I purchased two of these storage ottomans from Walmart, they fold down to nothing and are hidden in the closet of my office. They are actually incredibly strong and soft, feel like easy to clean as well. I intend to build different milking table inserts that I can put between them and lay horizontally across both ottomans. I have succeeded in doing this already with the Handy but have yet to build a suitable mount for the OSR2+

I had 2 cock docks printed from CraftCloud using PETG. The total shipped cost of 2 complete cock dock prints was $87.87 shipped. First experience 3d printing via mail order and it was positive. I do not plan on owning a 3d printer anytime soon. I ordered the steel rods on Amazon.

I dove into my prototype today, it took two tries as in the end the holes for the main receiver and the holes for the rod caps were quite close together, I broke through on the first try because I was drilling too quickly.

I used a 3 inch hole saw for the center. I used some smaller hole saw bits to create two countersunk holes that are tapered to the same dimensions as the cock dock caps. This I thought would work better then trying to just drill the rods into the board completely straight. worked perfectly.

Everything came together pretty easily after that. Just assembled the cock dock and I am using a total of 4 rod caps in the end instead of 2 because I am capping on both ends. Alternatively for the final product I may just mount the cock dock plate on the wood. that is probably the best way.

Will aim to do the final build on some nicer wood that is more rectangle than square. Will try and give this thing a shot sometime soon.

Any improvement suggestions before I start testing and move on to the final build?

Any recommendations on cutting down the steel rods to the proper length to avoid pop off?

Just wanted to share an easy receiver modification I tried this morning that made me cum fairly fast.

I love frenulum stimulation, my partner can often times get me off with literally one finger slowly just stroking my frenulum up and down, in circles etc. It is my favorite sensation and my strongest orgasm. It is tedious for her to perform and I have always wanted to recreate the feeling with an automated device and have been thinking about it non stop.

I came across these silicone pencil sleeves for school supplies, some of them have some interesting textures that look like they would go from mild to wild so I ordered a set on Amazon. There are a million different sellers but this round up looked good.

For my first experiment I used the blue one on the far right with the minor spiral. I simply set up my device per usual. Given I was going for frenulum stimulation I set up the small receiver with a 2inch latex sleeve and the xtight vacuum seal under the liner as a poster introduced this week. i set the stroke length to somewhere in the middle. Once things got going and I was fully erect and foreskin retracted (uncircumcised) I simply removed the top of the receiver and carefully slide the blue pencil grip down between my frenulum zone and the side of the latex sleeve. Reinstalled the cap and it worked perfectly. Will attach a photo and video here I put on red gifs to show the placement. The video is after I finished so I turned it down to 5% speed but was using about 30% speed during the orgasm.

I think next I will try the green polka dots, I think it will be a little more mild and teasing.

Try it out, jam something in the sleeve, I imagine anything with sharp edges is not a good idea with the latex......

Photo

Gif - barley still moving but I wanted to show the motion

Anyone else try anything similar?

Getting ready for a silly night, I have hooked the Vacuglide 2 up to the OSR2+ using a knockoff quickshot and the universal adapter. My plan is to run the Vacuglide on the shortest stroke just to create some suction.

The stroker feels pretty well sealed but will find out how well I sealed it later.

Probably more danger to the servo's in the OSR than to the Vacuglide.

Anyone else try any interesting combos with their different toys?

Pic for laughs and attention

Very intrigued by the vacuglide 2. Been combing this community and others to learn more. Current handy 1 and osr2+ user so familiar with similar systems on the stroking side. Very into slow light edging with my current devices. Wish they went even slower.

Not much experience with suction or this type of stroke, looks very different.

How can I experience a vacuglide sort of experience to see if I like it before I drop $1k on device/accessories?

I am fortunate to be able to spend on this hobby but I still like to use my budget wisely as I think we all accept no take backs in this world.

Can I purchase any sort of manual or lower tier device to evaluate the sensation before I take the leap?

Any guidance appreciated