r/3DPrintedChastity

So, this is the same 3D model I posted a few days ago. But I tried an Elegoo Smoky Black clear resin. After it printed it was very cloudy, so I cleaned up the supports, and smothed it out. After that I dipped it in a cup of the same Resin, let it drip clear, then hit it with a UV flashlight. After that, I put it in the curing station for 30 mins, then washed it off. Then a second wash with dish soap.

This is the result.

It came out surprisingly transparent. The dipping did well, I would not use it for anything with lots of detail, but for stuff like this it came out great.

I am a trans woman and I would like a belt that tightly constricts my penis so that there is no bulge, I looked at the designs but they all have a certain bulge, I wondered if it was possible to do a large belt that really covers the entire surface And comes back down Between the legs , all in 3D printing, Or if there's something that's really preventing from doing it, something I wouldn't have thought of.

I've found my old 3D printed lock box and i want to remake it with a better printer but I don't even know what this is called.

Does anyone know a link for this thing?

Went 39 days on my first stint before the wife got impatient. On day 13 now, who knows how long this one will be.

Found this on Cults 3d, it was free.
so figured I would give it a try. the cock portion is big for me, but the ring is just right. I'll go back and see if they have any different sizes for free. Over all this came out well. Feels stronger than it looks. I did have to sand the "pin" to get the right fit, that is what the brass loop is screwed into.

I don't wear chastity much, but I do like this. Oh, bonus, very easy to take it off for bathroom breaks and pop it back on so it stays clean.

Hi I'm looking for someone able to make a cage with this kind of design I'm pretty hung myself and because I'm trans it's hard to find a good fit that doesn't make a huge bulge when I get dressed I also have to deal with shafting and stuff I bought like 30 different type of cage and none could satisfied me I feel like this design could work but they're sold for over 1000$ which makes it pretty expensive for a guess if anyone has ideas for where to look or just happy to lend a hand pls hmu thx

This was so comfortable to sleep in; the balls don't get squished at all and i can even lie down on my belly without the cage getting in the way as long as I'm soft. There's not a single position which doesn't work, surprisingly. When im sitting down, the balls might get squished between my legs, but if my legs are closed before I sit down, they don't get squished. I haven't tried it yet, but I'm pretty sure I could ride a bike while wearing this. I don't have any issues while running or while practicing martial arts.

Changes: I made the lock smaller since the v1 lock was way stronger than necessary, made the ring thicker so that it's smoother and more comfortable, changed the dimensions of the cage a little bit, made the peehole bigger (it's still not positioned perfectly so if I make a v3 i'll make sure it lines up with the urethra properly) and I also added holes in the ring to tie a shoelace.

Update: Tried riding a bike, barely felt it there. Morning wood was a bit of a challenge because the erection wouldnt go down until I peed, and it was super messy because the peehole doesn't line up with the urethra. It really seems like the only change I need to make is the peehole placement.

Introducing the best chastity in the history of chastities.

Here is the direct link to it : https://cults3d.com/en/3d-model/naughties/chastity-cage-double-trouble-lockedsis

Fully compatible with any of my ring designs.
Hope you'll like it!

I was an idiot with v1 — left too large an opening next to the weave in front of the glans. It made me scared to sleep in it because the penis does weird things at night. I also redid the ring weave geometry which fixed and issue I had with the profile orientation slightly rotating as it went through the loft.

But some good news. V1's and V3's rings are interchangeable! That means a customer can order a new ring and I can be fairly confident it will fit their cage. Now, when I open for betas, I'm going to order all at once and make sure every ring fits every cage. And hope I don't get them all mixed up and send the wrong ring with the wrong cage. Probably ought to use some painter's tape and label them ;)

Anyway, I'm going to prep v4 (the render) and get it in titanium to see how that comes out.

The primary difference with V4 is the lofted lip over the meatus (the tip) and replacing the cage entry ring with the flowing bars.

now for a domme!😉

Many of the 3d printed cages still require you to buy some kind of metal lock or use threaded inserts, etc. I wanted to design something that was 100% 3d printed. The lock in this case is made of 100% printable plastic and it can't be taken out without the key. It wont break unless you pull on it extremely hard. Currently, the key is a 3mm allen key, but the key slot could obviously be changed to fit a little 3d printed key. I just had an allen key lying around and metal is pretty good.

Also, the cage is still really comfortable with a foreskin unlike others, which in my experience pinch at the tip, constrict in other ways, or make peeing messier. this is meant to be worn with the foreskin not retracted. For cut people or people who want to wear it with the foreskin pulled back, I think I need to make the glans area a bit smaller. It's still comfortable regardless.

This is V1, so there are still some adjustments to be made.

The ball gap is not an issue. I designed this to be bent with a lighter until comfortable.

If there are any suggestions, please let me know. I can release the .stl files after a bit of refining